Views: 171 Author: Sanyuantang Publish Time: 2023-09-18 Origin: Site
Weekend, of August 6th, the Indian customer came to our factory to visit the square gyratory screener. He is very interested in our duplex 5 layers type gyratory screen machine, and contracted for two pieces of equipment for screening Tungsten Carbide Powder.
Pure tungsten carbide is brittle. If a small amount of titanium, cobalt and other metals are added, the brittleness can be reduced. Therefore, the screening force is required to be relatively light and not to cause damage to the materials.
The mesh size is 180-270 mesh, and the output per square meter of screen area is required to be around 2 tons per hour.
The screening efficiency is above 95%, and the dust content in the air is less than 10mg/m3.
Screening is carried out in a closed state to avoid dust flying, causing loss of raw materials and environmental pollution.
According to customer requirements, we recommended a gyratory screener for customers. Fine-grained tungsten carbide passes through a 200-mesh sieve, medium-grained tungsten carbide passes through a 250-mesh sieve, and coarse-grained tungsten carbide passes through a 60-mesh sieve. The output can reach 2-3 tons per hour. The customer was very satisfied with our solution and decided to order one for production.
FYBS square swing gyratory screener is a kind of screening equipment that effectively simulates the principle of manual screening (screening accuracy, efficiency, and screen life are 5-10 times that of conventional round screens). Through a specific reciprocating rotary motion method and low The highly inclined screen surface allows materials to pass through the screen surface quickly, achieving high screening efficiency and large output. It is widely used in the screening of dry and wet materials in chemical fertilizers, urea, chemical powders, PVC industry, soda ash, starch, medicine, ceramics, grain and other industries, and can meet the needs of large-volume and high-density screening. This series of equipment has high screening efficiency, high screen utilization rate, stable and reliable operation, is not easy to crush qualified particles, and avoids pollution. It is an environmentally friendly screening equipment.
1. Good sealing performance, fully enclosed dust does not fly, high screening efficiency and high precision
2. Easy to disassemble and easy to clean inside and outside
3. The discharge port can be adjusted 360 degrees, making it easy to connect with the site.
4. Specially designed multiple screen cleaning devices enable the screen to have a higher penetration rate, fast material discharging and high output.
5. Low energy consumption, quick startup, low noise, no need for base installation, and can be placed at any desired location
6. New grid structure, the screen has a long service life, the mesh does not deform, and it only takes 3-5 minutes to change the screen. There are no dead ends in the parts, and it is easy to clean and disinfect thoroughly.
7. The technology is mature and reliable and exported to many countries around the world.
8. It can be used in single layer or multiple layers, and can be screened at multiple levels at one time.
We are more than 20 years of vibrating screen manufacturer, with a mature technical team, according to the production needs, professional for you to solve the screening problem! Welcome to China! Welcome to the Sanyuantang machine!
To learn more about gyratory screener, please read the following article：